HIGHSIDER AKRON-RS license plate holder
Easy replacement, without drilling or cutting
The racing sign holder is simply mounted on the original mounting points. This is made possible by the precisely fitting model-specific bracket, which is prefabricated exactly to the dimensions of the series bikes.
The stepless adjustment allows you to bring the plate into the desired position without drilling. To keep the plate in this position, there is an additional locking screw.
The turn signal brackets of the HIGHSIDER AKRON-RS are adjustable in width and thus suitable for any type of accessory turn signals. This adjustment option allows you to adjust the position for your turn signals to the most diverse license plates. To allow the mounting of the turn signals without disconnecting from the wiring harness, the 8 mm holes are slotted to the side.
You can also adjust the position of the reflector individually via a slider. An adaptation to the different designs of the EU license plates is therefore no problem.
Two rubber washers are included to securely screw the license plate and reduce vibrations. Another rubber buffer supports the license plate on its underside.
Details:
- model specific bracket
- steplessly adjustable turn signal holder
- slotted turn signal mount for easy installation without cable separation
- infinitely adjustable reflector, E-approved
- suitable for european license plates
- Continuously adjustable angle of inclination
- additional screw for optimal position security
- easy fixation without further work steps (e.g. drilling)
- easy mounting of the license plate due to slotted holes
The scope of delivery of the HIGHSIDER AKRON-RS PRO includes:
- Model related bracket with mounting parts
- HIGHSIDER AKRON-RS license plate holder plate
- Adjustable turn signal brackets
- E-approved reflector with adjustable holder
- Assembly instruction
Notes:
If side reflectors are mounted on your original license plate holder, they must be reattached in a suitable position or replaced with new ones.
Special turn signal holders are optionally available for the original turn signals.
Tip:
If you have not found a model-specific license plate holder for your vehicle, the universal license plate holders from HIGHSIDER, which are available in many different designs, are certainly a good alternative.
Suitable for the following models:
| Manfacturer | Model | Chassis number | Built from | Built to |
|---|---|---|---|---|
| KTM | 690 Duke ABS, 54 KW | — | 2017 | 2017 |
| KTM | 690 Duke R ABS, 55 KW | — | 2017 | 2017 |
| KTM | 690 Duke, 48 KW | — | 2012 | 2012 |
| KTM | 690 Duke ABS, 54 KW | — | 2018 | 2018 |
| KTM | 690 Duke ABS, 50 KW | — | 2014 | 2014 |
| KTM | 690 Duke R ABS, 51 KW | — | 2014 | 2014 |
| KTM | 690 Duke, 54 KW | — | 2019 | 2019 |
| KTM | 690 Duke R, 51 KW | — | 2012 | 2012 |
| KTM | 690 Duke ABS, 50 KW | — | 2015 | 2015 |
| KTM | 690 Duke ABS, 54 KW | — | 2016 | 2016 |
| KTM | 690 Duke R ABS, 51 KW | — | 2015 | 2015 |
| KTM | 690 Duke R ABS, 55 KW | — | 2016 | 2016 |
| KTM | 690 Duke ABS, 50 KW | — | 2012 | 2012 |
