With the original SPIEGLER bicycle steel braided brake lines for the shift &o; brake group of Tektro Spyke, you achieve a completely new braking performance!
SPIEGLER steel braided lines - the ORIGINAL! Trust our decades of expertise and make no compromises!When braking with disc breaks on a bicycle or e-bike, the brake discs/discs get up to 400°C hot, the brake pads up to over 140°C. Especially in descents from passes with the road bike, off-road with cyclocross or mountain bike, for cargo bikes.... brake cables made of Stahlflex offer decisive advantages and are almost indefinitely durable. Optimal braking pressure point, combined with outstanding dosing. For noticeably more safety and improved braking performance.
We have listed suitable connections and fittings for over 800 models. The connections correspond to the original and can therefore be mounted without any problems
Laying types
Trains routed on the frame / outside
The line will pressed on both sides by us and can be screwed as usual and attached to the original holders.Internally routed cables/trains
One side is firmly pressed by us. The other side is screwed with the supplied accessories after the cable has been passed through the frame.Assembly instructions & video are included with the cables!
How to measure the correct line length:
- For ring fittings please always measure from hole center to hole center.
- For screwed fittings, always measure to the end of the thread.
Product & Model Data:
Manufacturer: TektroModel / Brake Group: Spyke
Installation location: Rear brake
Scope of delivery:
Our kits already contain all the lines and small parts required for installation.
Assembly instructions & video are included with the cables!
Our kits already contain all the lines and small parts required for installation.
Assembly instructions & video are included with the cables!
Technical data:
- Suitable for mineral oil and brake fluid
- Steel mesh Hose dimension: Ø outside 6.00 mm / Ø inside 2.00 mm
- Original TEFLON Inner layer (PTFE)
- Tensile strength: > 240 Kp
- Bursting pressure: 966 bar
- Minimum bending radius: 25mm
- Diameter: 3,2 x 6,2
- Non flammable
- Temperature resistant up to 260°C
Advantages:
- Precise pressure point
- Outstanding dosing capability
- Lower leverage
- Shorter braking distance
- Resistant to all weather conditions
- Safe against marten browsing
- Bending in case of fall is almost impossible
- Highest original SPIEGLER quality!
